Inventory Unit Detail
2024 Lane Shark LS-3 3' FEL Mounted Brush Cutter
$4,500.00
Key Features
New/Used New
Availability
In Stock
LocationFoltz Ag Enterprises - Lancaster
VIN
LS32425
Condition
Excellent
Product Features
Dealer Notes
The Lane Shark LS-3 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The Lane Shark has 11 positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions.
The Lane Shark LS-3 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
The Lane Shark LS-3 weighs just under 320 lbs.
When purchasing the Lane Shark LS-3 brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum hose inside diameter of 3/8” is required.
NOT COMPATIBLE WITH SKID STEERS
Hydraulic implement flow rate 5gpm to 8.5gpm - Standard motor
Hydraulic implement flow rate 8.6gpm to 15gpm - High capacity motor (Special Order Only)
Third function or Lane Shark valve kit. ONLY pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS).
We do not recommend rear remote plumbing as some tractors may lose loader priority
NOT COMPATIBLE WITH DIVERTER VALVES
Minimum dry tractor weight 2000lbs
Minimum tractor width 55 inches
Certified roll over protection system
For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.
Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The Lane Shark has 11 positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions.
The Lane Shark LS-3 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
The Lane Shark LS-3 weighs just under 320 lbs.
When purchasing the Lane Shark LS-3 brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum hose inside diameter of 3/8” is required.
NOT COMPATIBLE WITH SKID STEERS
Hydraulic implement flow rate 5gpm to 8.5gpm - Standard motor
Hydraulic implement flow rate 8.6gpm to 15gpm - High capacity motor (Special Order Only)
Third function or Lane Shark valve kit. ONLY pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS).
We do not recommend rear remote plumbing as some tractors may lose loader priority
NOT COMPATIBLE WITH DIVERTER VALVES
Minimum dry tractor weight 2000lbs
Minimum tractor width 55 inches
Certified roll over protection system
For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.