The patented bale damper system gently lowers the bale to the ground while eliminating any stress on the chassis of the machine.
On the 991 BE and High-Speed, the auto lift function places the bale on the wrapping table automatically.
The 991 B range can carry 7 rolls of film: 1 roll (dispenser) + 6 rolls (film storage)
An optional side tip is available on all trailed machines to place bales on their ends after wrapping is complete.
At the end of the wrapping cycle, the hydraulically operated cut & hold system cuts and holds the film in position ready to wrap the next bale.
Automatic film break sensors monitor the plastic as it leaves the dispenser rollers. If plastic breaks or runs out, the machine will notify the operator via the control console.
The McHale lock and load system makes film loading quick and easy by locking the dispenser bobbin up when unloading and locking it back down by simply pulling the cable.
The bale is loaded using the auto lift function. When the operator drives into the bale, the lift arm is activated and the bale is automatically lifted onto the wrapping table and wrapped.
A shear Bolt protects the gearbox when wrapping poorly shaped bales. All machines are now driven by a heavier gearbox than previous models.
The bale is loaded using the auto lift function. When the operator drives into the bale, the lift arm is activated and the bale is automatically lifted onto the wrapping table and wrapped.
With a radio remote control kit, an operator can load a bale and activate the automatic cycle remotely.